Introducing the Pulsar Thermal Zeroing Target, a revolutionary solution designed for effortless and precise calibration of thermal imaging riflescopes.

How to Use:

Follow these 10 simple steps to ensure successful utilization of the heated targets:

1. Activation: Keep the heat pack sealed until you're ready to use it as it's air-activated.

2. Unpack: Open the packaging and carefully remove the heat pad.

3. Caution: Avoid cutting or damaging the heat pad during extraction.

4. Preparation: Peel off the paper strip from the back of the heat pad to expose the adhesive surface.

5. Application: Affix the heat pad onto the designated circle marked on the paper target using the adhesive side.

6. Heat Up: No shaking required; the heat pad will warm up autonomously within 3-5 minutes.

7. Placement: Securely attach the paper target to your preferred location.

8. Calibration: Using a thermal imaging scope mounted on your firearm, aim at the heated pad to optimize the thermal view, ensuring clarity.

9. Zeroing: Refer to your thermal imaging device's user manual for detailed instructions on performing the zeroing procedure.

10. Precision: Leveraging the pad's round shape and small diameter, achieve pinpoint accuracy with just a few shots, eliminating any deviations in the point of impact.

Specifications of Activated Heat Pack:

• Box Contents: 10 pieces of paper targets sized at 30 x 30 cm.

• Heating Pads: 10 pieces of carbon-activated heating pads with adhesive sides, boasting a heated surface of 40 mm.

• Duration: Experience 10-20 minutes of sustained heat on cold surfaces (subject to weather conditions).

• Composition: Crafted with a blend of iron powder, activated carbon, vermiculite, salt, resin, and water for optimal performance.

Upgrade your zeroing-in experience with the Pulsar Thermal Zeroing Target, ensuring unparalleled accuracy and efficiency in thermal imaging rifle scopes calibration.